Heat Resistant Alloys PVD Coated Carbide Turning Inserts VNEG160408-NGF for Semifinishing
Application:
ISO S materials, heat Resistant alloys semi-finishing and finishing turning.
Feature Advantage:
- Chipbreaker NGF:
- The insert surface is smooth, the chip is smooth, and the chip breaking is good.
- The cutting edge is sharp and the cutting resistance is small, which can effectively reduce the groove wear.
- The cutting edge adopts a variable rake angle design to increase the edge strength at large depth of cut. As the depth of cut increases, the edge strength increases.
- The large groove width combined with the unique edge reinforcement design not only has excellent chip breaking performance, but also effectively improves the edge strength.
- Grade:
| Grade | Coating | Performance | Equivalent Grade |
| MP6205 | TiAlN Coating | - The universal preferred grade for roughing and semi-finishing of superalloy materials.
- High-performance TiAlN coating of nanostructures ensures high toughness and hardness of the insert.
- It has higher wear resistance and high temperature oxidation resistance.
- Special coating treatment technology, the coating and matrix are more firmly bonded.
| GC1005 GC1025 GC4125
VP15TF PR915 |
| MN10 | Uncoating | - Ultrafine grained carbide, uncoated grade.
- Excellent wear resistance, high strength and resistance to thermal deformation.
- Suitable for processing materials such as non-ferrous metals and superalloys.
- Better versatility and economy.
| H10
HTi10
H01 |
ISO standard turning inserts are available in a variety of conventional types.Different insert arcs of various specifications (R0.2, R0.4, R0.8, R1.2, etc.)
Recommended Cutting Parameters:
- The following cutting parameters are the recommended range values. Appropriate adjustments and selections should be considered after considering the following factors:
- Specific physical properties of the material being processed
- The actual condition of the part blank
- Power and rigidity of the machine tool
- Clamping rigidity of tools and workpieces
- Balance between tool life and processing efficiency
| | | MP6205 | MN10 |
| | | Feed (mm/rev) | |
| | | 0.05 - 0.2 | 0.05 - 0.35 |
| ISO | Hardness (HB) | Speed (m/min) | |
| S | 40 | 90 - 30 | 70 - 20 |
